AD 2004-16-15 R1
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Airbus Helicopters | AS-365N2 | Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters |
| aircraft | Airbus Helicopters | AS-365N3 | Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters |
| aircraft | Airbus Helicopters | EC 155B | Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters |
| aircraft | Airbus Helicopters | EC155B1 | Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters |
| aircraft | Airbus Helicopters | SA-365N | Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters |
| aircraft | Airbus Helicopters | SA-365N1 | Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters |
| aircraft | Airbus Helicopters | SA-366G1 | Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters |
Unsafe Condition
Crack in the main gearbox (MGB) base plate close to the attachment hole, which could propagate into the MGB casing and result in failure of an MGB attachment point to the frame, leading to severe vibration and subsequent loss of control.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Visually inspect the MGB base plate for cracks using a 10x or higher magnifying glass. Strip paint from the inspection area before the initial inspection. Replace the MGB if a crack is found.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
before further flight
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 helicopters, all serial numbers.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Main gearbox (MGB) base plate
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - 2004-16-15 R1.pdf Copy URL Document Versions Feedback DetailsAttachments/Public Comments AD Number: 2004-16-15 R1 Document Type: AD Final Rules Docket Number: FAA-2004-18850 Subject Heading: Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1...Show more Subject: Main gearbox (MGB) base plate Status: Current Citation: (Federal Register: July 26, 2006 (Volume 71, Number 143)) Citation Publish Date: 07/26/2006 Effective Date: 08/30/2006 Make: Airbus Helicopters Model: AS-365N2 | AS-365N3 | EC 155B | EC155B1 | SA-365N | SA-365N1 | SA-366G1 Product Type: Aircraft Product Subtype: Rotorcraft Affected AD: Superseded AD: 2004-16-15 Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: Automatic Zoom Actual Size Page Fit Page Width 50% 75% 100% 125% 150% 200% 300% 400% 125% of 7 1 [Federal Register: July 26, 2006 (Volume 71, Number 143)] [Rules and Regulations] [Page 42254-42258] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr26jy06-5] –––––––––––––––––––––––––––––––––––- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2004-18850; Directorate Identifier 2004-SW-19-AD; Amendment 39-14694; AD 2004-16-15 R1] RIN 2120-AA64 Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters AGENCY: Federal Aviation Administration, DOT. ACTION: Final rule. –––––––––––––––––––––––––––––––––––- SUMMARY: This amendment revises an existing airworthiness directive (AD) for Eurocopter France (Eurocopter) Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA- 366G1 helicopters that currently requires inspecting the main gearbox (MGB) base plate for a crack and replacing the MGB if a crack is found. This amendment increases the time intervals for inspecting the MGB base plate and includes minor editorial changes throughout the AD. This amendment is prompted by crack growth tests that indicate that the inspection intervals can be increased without affecting safety. The actions specified by this AD are intended to detect a crack in an MGB base plate and prevent failure of one of the MGB attachment points to the frame, which could result in severe vibration and subsequent loss of control of the helicopter. DATES: Effective August 30, 2006. ADDRESSES: You may get the service information identified in this AD from American Eurocopter Corporation, 2701 Forum Drive, Grand Prairie, Texas 75053-4005, telephone (972) 641-3460, fax (972) 641-3527. Examining the Docket: You may examine the docket that contains this AD, any comments, and other information on the Internet at http://dms.dot.gov, or at the Docket Management System (DMS), U.S. Department of Transportation, 400 Seventh Street, SW., Room PL-401, on the plaza level of the Nassif Building, Washington, DC. FOR FURTHER INFORMATION CONTACT: Ed Cuevas, Aviation Safety Engineer, FAA, Rotorcraft Directorate, Safety Management Group, Fort Worth, Texas 76193-0111, telephone (817) 222-5355, fax (817) 222-5961. SUPPLEMENTARY INFORMATION: On August 4, 2004, we issued AD 2004-16-15, Amendment 39-13771 (69 FR 51358, August 19, 2004), to require visually inspecting the MGB for a 2 crack in the MGB base plate, part number (P/N) 366A32-1062-03 or P/N 366A32-1062-06, close to the attachment hole using a 10x or higher magnifying glass. Stripping paint from the inspection area is also required, but only before the initial inspection. That action was prompted by the discovery of a crack in the MGB base plate of an MGB installed in a Model AS-365 N2 helicopter. The crack was located very close to the attachment points of one of the laminated pads, and it propagated to the inside of the MGB base plate and then continued into the MGB casing. That condition, if not detected, could result in failure of one of the MGB attachment points to the frame, which could result in severe vibration and subsequent loss of control of the helicopter. When we issued AD 2004-16-15, the cause of crack in the MGB base plate was still under investigation; therefore, we considered the previously issued AD to be interim action until the cause of the crack could be determined. The cause of the crack is still under investigation. However, since issuing AD 2004-16-15, crack growth tests have shown that the inspection intervals can be increased without affecting safety. We made this determination after Eurocopter conducted crack growth testing in laboratory bench tests. A cracked base plate was loaded with an alternating torque to simulate flight loading and cycles. Crack propagation speed was measured and assessed over a longer duration than the initial inspection interval and this resulted in extending the inspection intervals. The first inspection interval was determined using crack striations, which was a quick and conservative method used to ensure airworthiness and allow for timely issuance of service information by the manufacturer. Based on this additional information, a proposal to amend 14 CFR part 39 by revising AD 2004-16-15, Amendment 39-13771 (69 FR 51358, August 19, 2004), for the specified Eurocopter model helicopters, was published in the Federal Register on May 2, 2006 (71 FR 25789). That action proposed to increase the time intervals between each required inspection and proposed to include minor editorial changes in the AD. The Direction Générale de L'Aviation Civile (DGAC), the airworthiness authority for France, notified the FAA that an unsafe condition may exist on Eurocopter Model SA 365N, N1, SA 366 G1, AS 365 N2, N3, EC 155 B, and B1 helicopters, all serial numbers. The DGAC advises that a crack was detected in the MGB base plate of an AS 365 N2 helicopter. The crack was detected in the MGB base plate web, very close to the attachment of one of the laminated pads, and runs to the inside of the MGB base plate and then on the MGB casing. In time, the growth of the crack may lead to the loss of the transfer of rotor torque to the rotorcraft structure. Eurocopter has issued Alert Service Bulletin (ASB) No. 05.00.45 for Model AS365 N, N1, N2, and N3 helicopters; ASB No. 05.29 for Model SA366 G1 helicopters; and ASB No. 05A005 for Model EC155 B and B1 helicopters. All of the ASBs are dated November 8, 2004 and supersede previously issued Eurocopter Alert Telex No. 05.00.45, No. 05.29, and No. 05A005, all dated February 5, 2004. The ASBs specify the same actions as the alert telexes–visually inspecting the MGB base plate for the absence of cracks, using a 10x magnifying glass to facilitate the crack inspection, and, if in doubt about the existence of a crack, inspecting for a crack using a dye- penetrant crack detection inspection. However, for the Eurocopter Model AS365 N, N1, N2, N3, and SA366 G1 helicopters, the 15-flying hour check for the MGB base plate that is specified in the alert telexes is replaced with check intervals not to exceed 55 flying hours. For the EC155 B and B1 helicopters, the check after the last flight of each day and without exceeding a 9-flying hour check interval is replaced with check intervals not to exceed 15 flying hours. The DGAC classified ASB Nos. 05.00.45, 05.29, and 05A005 as mandatory and issued AD No. F-2004-023 R1, dated November 24, 2004, to ensure the continued airworthiness of these helicopters in France. These helicopter models are manufactured in France and are type certificated for operation in the United States under the provisions of 14 CFR 21.29 and the applicable bilateral agreement. Pursuant to the applicable bilateral agreement, the DGAC has kept the FAA informed of the situation described above. We have examined the findings of the DGAC, reviewed all available information, and determined that AD action is necessary for products of these type designs that are certificated for operation in the United States.
Document Text
Show stored source text (verify against official source)
AD Final Rules - 2004-16-15 R1.pdf Copy URL Document Versions Feedback DetailsAttachments/Public Comments AD Number: 2004-16-15 R1 Document Type: AD Final Rules Docket Number: FAA-2004-18850 Subject Heading: Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1...Show more Subject: Main gearbox (MGB) base plate Status: Current Citation: (Federal Register: July 26, 2006 (Volume 71, Number 143)) Citation Publish Date: 07/26/2006 Effective Date: 08/30/2006 Make: Airbus Helicopters Model: AS-365N2 | AS-365N3 | EC 155B | EC155B1 | SA-365N | SA-365N1 | SA-366G1 Product Type: Aircraft Product Subtype: Rotorcraft Affected AD: Superseded AD: 2004-16-15 Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: Automatic Zoom Actual Size Page Fit Page Width 50% 75% 100% 125% 150% 200% 300% 400% 125% of 7 1 [Federal Register: July 26, 2006 (Volume 71, Number 143)] [Rules and Regulations] [Page 42254-42258] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr26jy06-5] –––––––––––––––––––––––––––––––––––- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2004-18850; Directorate Identifier 2004-SW-19-AD; Amendment 39-14694; AD 2004-16-15 R1] RIN 2120-AA64 Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA-366G1 Helicopters AGENCY: Federal Aviation Administration, DOT. ACTION: Final rule. –––––––––––––––––––––––––––––––––––- SUMMARY: This amendment revises an existing airworthiness directive (AD) for Eurocopter France (Eurocopter) Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, N1, and SA- 366G1 helicopters that currently requires inspecting the main gearbox (MGB) base plate for a crack and replacing the MGB if a crack is found. This amendment increases the time intervals for inspecting the MGB base plate and includes minor editorial changes throughout the AD. This amendment is prompted by crack growth tests that indicate that the inspection intervals can be increased without affecting safety. The actions specified by this AD are intended to detect a crack in an MGB base plate and prevent failure of one of the MGB attachment points to the frame, which could result in severe vibration and subsequent loss of control of the helicopter. DATES: Effective August 30, 2006. ADDRESSES: You may get the service information identified in this AD from American Eurocopter Corporation, 2701 Forum Drive, Grand Prairie, Texas 75053-4005, telephone (972) 641-3460, fax (972) 641-3527. Examining the Docket: You may examine the docket that contains this AD, any comments, and other information on the Internet at http://dms.dot.gov, or at the Docket Management System (DMS), U.S. Department of Transportation, 400 Seventh Street, SW., Room PL-401, on the plaza level of the Nassif Building, Washington, DC. FOR FURTHER INFORMATION CONTACT: Ed Cuevas, Aviation Safety Engineer, FAA, Rotorcraft Directorate, Safety Management Group, Fort Worth, Texas 76193-0111, telephone (817) 222-5355, fax (817) 222-5961. SUPPLEMENTARY INFORMATION: On August 4, 2004, we issued AD 2004-16-15, Amendment 39-13771 (69 FR 51358, August 19, 2004), to require visually inspecting the MGB for a 2 crack in the MGB base plate, part number (P/N) 366A32-1062-03 or P/N 366A32-1062-06, close to the attachment hole using a 10x or higher magnifying glass. Stripping paint from the inspection area is also required, but only before the initial inspection. That action was prompted by the discovery of a crack in the MGB base plate of an MGB installed in a Model AS-365 N2 helicopter. The crack was located very close to the attachment points of one of the laminated pads, and it propagated to the inside of the MGB base plate and then continued into the MGB casing. That condition, if not detected, could result in failure of one of the MGB attachment points to the frame, which could result in severe vibration and subsequent loss of control of the helicopter. When we issued AD 2004-16-15, the cause of crack in the MGB base plate was still under investigation; therefore, we considered the previously issued AD to be interim action until the cause of the crack could be determined. The cause of the crack is still under investigation. However, since issuing AD 2004-16-15, crack growth tests have shown that the inspection intervals can be increased without affecting safety. We made this determination after Eurocopter conducted crack growth testing in laboratory bench tests. A cracked base plate was loaded with an alternating torque to simulate flight loading and cycles. Crack propagation speed was measured and assessed over a longer duration than the initial inspection interval and this resulted in extending the inspection intervals. The first inspection interval was determined using crack striations, which was a quick and conservative method used to ensure airworthiness and allow for timely issuance of service information by the manufacturer. Based on this additional information, a proposal to amend 14 CFR part 39 by revising AD 2004-16-15, Amendment 39-13771 (69 FR 51358, August 19, 2004), for the specified Eurocopter model helicopters, was published in the Federal Register on May 2, 2006 (71 FR 25789). That action proposed to increase the time intervals between each required inspection and proposed to include minor editorial changes in the AD. The Direction Générale de L'Aviation Civile (DGAC), the airworthiness authority for France, notified the FAA that an unsafe condition may exist on Eurocopter Model SA 365N, N1, SA 366 G1, AS 365 N2, N3, EC 155 B, and B1 helicopters, all serial numbers. The DGAC advises that a crack was detected in the MGB base plate of an AS 365 N2 helicopter. The crack was detected in the MGB base plate web, very close to the attachment of one of the laminated pads, and runs to the inside of the MGB base plate and then on the MGB casing. In time, the growth of the crack may lead to the loss of the transfer of rotor torque to the rotorcraft structure. Eurocopter has issued Alert Service Bulletin (ASB) No. 05.00.45 for Model AS365 N, N1, N2, and N3 helicopters; ASB No. 05.29 for Model SA366 G1 helicopters; and ASB No. 05A005 for Model EC155 B and B1 helicopters. All of the ASBs are dated November 8, 2004 and supersede previously issued Eurocopter Alert Telex No. 05.00.45, No. 05.29, and No. 05A005, all dated February 5, 2004. The ASBs specify the same actions as the alert telexes–visually inspecting the MGB base plate for the absence of cracks, using a 10x magnifying glass to facilitate the crack inspection, and, if in doubt about the existence of a crack, inspecting for a crack using a dye- penetrant crack detection inspection. However, for the Eurocopter Model AS365 N, N1, N2, N3, and SA366 G1 helicopters, the 15-flying hour check for the MGB base plate that is specified in the alert telexes is replaced with check intervals not to exceed 55 flying hours. For the EC155 B and B1 helicopters, the check after the last flight of each day and without exceeding a 9-flying hour check interval is replaced with check intervals not to exceed 15 flying hours. The DGAC classified ASB Nos. 05.00.45, 05.29, and 05A005 as mandatory and issued AD No. F-2004-023 R1, dated November 24, 2004, to ensure the continued airworthiness of these helicopters in France. These helicopter models are manufactured in France and are type certificated for operation in the United States under the provisions of 14 CFR 21.29 and the applicable bilateral agreement. Pursuant to the applicable bilateral agreement, the DGAC has kept the FAA informed of the situation described above. We have examined the findings of the DGAC, reviewed all available information, and determined that AD action is necessary for products of these type designs that are certificated for operation in the United States.
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.